Camaro OEM Screen – 6th Gen | 2017 ZL1 Factory Takeoff | 8″ Infotainment Display

Camaro OEM Screen – 6th Gen | 2017 ZL1 Factory Takeoff | 8″ Infotainment Display

—

PRODUCT OVERVIEW

Up for sale is a used OEM infotainment screen from a 2017 Chevrolet Camaro ZL1. This is the factory 8″ touchscreen display found in 2016-2018 Camaro models with the MyLink system. The screen was removed during an upgrade to an aftermarket unit and is in good working condition.

The 6th generation Camaro is known for screen delamination issues where the touchscreen becomes unresponsive, develops bubbles, or the anti-glare coating fails . This factory takeoff screen is a perfect replacement for owners experiencing these problems. This is the screen only – the HMI module behind the glove box is not included .

—

CONDITION DETAILS

✅ Good Working Condition – Fully functional, tested
✅ OEM Factory Part – Genuine GM screen from 2017 ZL1
✅ No Cracks – Screen glass is intact
✅ No Dead Pixels – Display is clear and bright
✅ No Delamination – No bubbles or separation issues
✅ 8″ Touchscreen – Factory size for 6th gen Camaro
✅ Clean – No major scratches or damage

Please review all photos carefully – they are part of the description.

—

KEY FEATURES

🔧 OEM GM Part – Genuine factory screen
🔧 8″ Touchscreen Display – Factory size for 2016-2018 Camaro
🔧 Capacitive Touch – Responsive touch input
🔧 Direct Replacement – Fits 2016-2018 Camaro
🔧 Good Condition – Fully functional, no delamination
🔧 Perfect for Replacement – Fixes common screen failures
🔧 From 2017 ZL1 – Low mileage takeoff

—

VEHICLE FITMENT

✅ Compatible Models (2016-2018):
– 2016 Chevrolet Camaro LS, LT, RS, SS, ZL1
– 2017 Chevrolet Camaro LS, LT, RS, SS, ZL1
– 2018 Chevrolet Camaro LS, LT, RS, SS, ZL1

✅ Compatible Trims:
– All trims with factory 8″ MyLink system

❌ Does NOT Fit:
– 2019-2024 Camaro (different screen design)
– 2016-2018 Camaro with 7″ base radio (different connector)
– Vehicles without MyLink system

⚠️ **Important Fitment Notes:**
– This screen fits 2016-2018 Camaro models with the factory 8″ MyLink system
– 2019+ facelift models have a different screen design and will NOT fit
– Base model 7″ radios use a different screen connector

—

WHAT’S INCLUDED

This sale includes:

• (1) OEM 8″ Infotainment Screen – From 2017 Camaro ZL1
• Factory touchscreen display
• Factory mounting brackets

❌ Does NOT Include:
– HMI module (radio module behind glove box)
– Radio control knobs
– Wiring harness
– Installation hardware
– Programming or calibration

—

COMMON SCREEN ISSUES IN 6TH GEN CAMAROS

The 2016-2018 Camaro is known for several screen problems:

**Delamination:**
– The touchscreen becomes unresponsive
– Bubbles appear under the glass
– Anti-glare coating peels or bubbles
– Touch input stops working in certain areas

**Cracked Glass:**
– Physical damage from impact
– Cracked or shattered display

**Dead Pixels:**
– Small dots or lines on the display
– Areas of the screen that don’t illuminate

This replacement screen solves all these issues.

—

INSTALLATION INFORMATION

⚠️ **PROFESSIONAL INSTALLATION RECOMMENDED** ⚠️

**Installation Time:** 1-2 hours
**Difficulty Level:** Moderate

**Installation Overview:**

1. Remove the radio/climate control bezel (carefully pry around edges)
2. Disconnect the wiring harness from the back of the screen
3. Remove screws securing the screen to the bezel
4. Remove the old screen
5. Install the replacement screen in the bezel
6. Reconnect the wiring harness
7. Reinstall the bezel assembly
8. Test all touch functions

**Tools Needed:**
– Trim removal tools (plastic pry tools)
– Torx screwdriver set (T15, T20 typically)
– Small flathead screwdriver

**Note:** The HMI module is behind the glove box and does not need to be replaced – this is just the screen.

—

PROGRAMMING NOTES

**Important:** This is just the display screen. The HMI module (brain of the infotainment system) is located behind the glove box and is not included .

– No programming is required for the screen itself
– The screen is a plug-and-play component
– Your existing HMI module will work with this screen
– All your vehicle’s settings and features will remain intact

—

WHY REPLACE YOUR CAMARO SCREEN?

Common reasons for replacement:

✅ **Delamination:** Bubbles under the screen causing unresponsive touch
✅ **Cracked Screen:** Physical damage from impact
✅ **Dead Pixels:** Dark spots or lines on the display
✅ **Anti-Glare Failure:** Peeling or bubbling coating
✅ **Touch Failure:** Screen no longer responds to touch input

—

FREQUENTLY ASKED QUESTIONS

**Will this fit my 2017 Camaro SS?**
Yes, this screen fits all 2016-2018 Camaro models with the 8″ MyLink system.

**Will this fit my 2019 Camaro?**
No, 2019+ facelift models have a different screen design.

**Does this include the HMI module?**
No, this is the screen only. The HMI module is behind the glove box and is not included.

**Is this a common problem on 6th gen Camaros?**
Yes, delamination and screen failure is a known issue on 2016-2018 Camaros .

**Does this screen have any delamination?**
No, this screen is in good condition with no bubbles or delamination.

**Do I need to program this screen?**
No, the screen is plug-and-play. No programming required.

**Will my backup camera still work?**
Yes, the screen displays all factory functions including backup camera.

**What about Apple CarPlay and Android Auto?**
Yes, all factory functions work normally with this screen.

**Can I install this myself?**
Yes, with basic trim removal tools and patience. Professional installation recommended if unsure.

**Will this fit my 2016 Camaro LT with 7″ screen?**
No, the 7″ base radio uses a different screen and connector.

**Can I see more photos?**
Absolutely – contact us and we’re happy to provide additional photos.

**What’s the return policy?**
Returns accepted within specified timeframe. Contact us for complete return policy details.

—

COMPLETE YOUR INTERIOR REPAIR

Pair this replacement screen with:

• Trim Removal Tool Kit
• Radio Bezel (if damaged during removal)
• HMI Module (if needed – sold separately)
• Screen Protector

—

SHIPPING INFORMATION

Processing Time: 1-3 business days
Shipping Method: FedEx / UPS
Delivery Time: 3-7 business days

The screen is carefully packaged in anti-static material to prevent damage during transit.

Local pickup is welcome – contact us to arrange.

—

ORDER YOUR CAMARO OEM SCREEN TODAY

Fix your 2016-2018 Camaro’s delaminated or cracked screen with this genuine OEM replacement from a 2017 ZL1. Good working condition, ready to install. Order today!

Questions about fitment or compatibility? Contact our Camaro specialist team for expert assistance!

/=== EXTERNAL RESOURCES ===

For installation guides and screen replacement tips, check Camaro6 Forums where owners share their infotainment repair experiences.